Morrison Brothers Valve with 2'' Shut Off Height

The 9095DS valve is installed at the fill port of a storage tank. Designed for use in pressurized fill systems and requires a tight fill connection. The valve installs in a 2 inch female threaded opening of a low profile tank requiring a high level shut-off. The valve terminates the fill when the product reaches the preset level. 

Standard Features

• Designed for fill applications that require a drop tube. (accepts a 1-1/2” male threaded drop tube)
• The valve design allows for full product flow until it reached the shut-off level
• The shut-off height is factory preset and is measured from the bottom of the attachment threads
• Typical flow rate is 26 GPM at 10 PSI pressure drop and 60 GPM at 60 PSI pressure drop
• 10 PSI & 5 GPM is the minimum flow requirement for the valve to operate. The valve will not work in gravity filling applications
• Can be retrofitted to existing tanks
• Immediate and cushioned shutoff…full flow up to within 1-2 seconds of closing and no abrupt kickback or line shock when valve closes
• Dry disconnect…after shut off product is allowed to automatically drain from the highest point so fill nozzle can be removed without spilling
• Simple mechanics…minimum moving parts. Shutoff is activated by basic hydraulic principle with no springs, levers or complicated sequence leading to closure

Construction Details

• Adaptor: Anodized aluminum Part A or Part F
• Body: Anodized aluminum
• Float: Nitrophyl-N
• Plunger and dashpot: Brass
• Upper tube and float guard: Aluminum
• Linkage: Stainless steel
• Shut off mechanism: Anodized aluminum